X25 mains filter 4,7 µF | more powerful capacity filter against dirty electricity

To dampen voltage peaks in the power supply’s alternating current network – also known as “dirty electricity” or “dirty power”.

The X25 mains filter can be installed in several places, but ideally directly installed to the mains disconnector or mains decoupler, and it enables both functions in one – mains filtering and cutting off the mains.

Delivery time: approx. 1-3 working days

In stock

SFERICS® field-tested and recommended

 16,30 ( 13,70 excl. VAT)

X25 mains filter 4.7 µF | capacity filter against dirty electricity

The X25 mains filter effectively dampens voltage peaks in the power supply network (alternating current).

Like the X21 mains filter, the X25 mains filter is a great and effective accessory for mains disconnectors, also called mains decouplers. However, the X25 has a capacity of 4.7 mF (microfarad) and therefore its effect is four times greater than that of the X21. Apart from that, it is identical to the X21 – self-healing and with a VDE sign.

The mains filter fulfills several functions at the same time, to the benefit of the person and the technology in the mains disconnector:

  • Dampening of voltage peaks in the supply network of the power supply (“dirty power” or “dirty electricity”).
  • Improvement of mains disconnectors’ EMC properties.
  • Increase of the mains disconnector’s switching stability.

X25 mains filter – excels in all fields and can be installed anywhere!

The X25 mains filter is an additional measure for the general improvement of the network quality of the circuit that is protected by the mains disconnector (mains decoupler). The X25 mains filter is effective regardless of the brand, type, or switch status of the mains decoupler. The X25 mains (capacitive) filter almost has five times the capacity of the X21 mains filter.

Comparison of the X21 and X25 mains filters

Installing the X25 mains filter

The X25 mains filter can be installed in many ways or places. The X25 line is installed in the L phase (live wire / black or brown) and the neutral conductor N (blue or gray).

  • In addition to the mains disconnector in the fuse box
  • In the circuit by the fuse in the fuse box
  • Straight into the socket (flush-mounted / surface-mounted)

In order to increase its effect, it is also possible to connect the mains filter in series, in other words, connecting several “next to one another”, but we do not recommend more than 3 pieces, because the additional effect of the mains filter will be very minimal.

What is dirty power or dirty electricity?

Dirty power is the potential of interference on the power lines and the resulting impact. It is a technical part of the harmonic waves in the power grid, and it is also the biological/sonic consequences. These stem from the effect of the harmonic waves in the power grid on the human body.

Dirty Electricity explained in detail

Video on filtering dirty electricity via Stetzer Filter:

The following video shows very clearly the load in the circuit due to these voltage peaks in the house electricity alternating current network. Our own measurements with the Stetzer Microsurge Meter in different households show us a very different load in the individual households – very often well over 300 GS units. Exposure to dirty electricity should be less than 50 GS, ideally less than 25 GS. The GS unit was named after Graham and Stetzer.

Note: We use the Stetzer Meter to detect dirty electricity, but not the Stetzer Filters to attenuate it.

Which is why we use capacitance filters as mains filters instead of Stetzer filters!

Quite clearly – the Stetzer filters work and are effective! However, after testing numerous Stetzer filters, we had to recognize that they do not work together with mains isolators or mains decouplers. As soon as these filters are plugged in, the mains switch no longer switches off because there is too much continuous consumption through these filters. So the conclusion: Either a mains switch without solving dirty electricity or a strong improvement of dirty power but no more mains switch. In addition, we were able to identify clear magnetic fields produced by Stetzer filters during the final measurement of Stetzer filters.

The Stetzer Filter works wonderfully – no issues there. However, after testing many Stetzer Filters, we had to recognize that these do not work with mains disconnectors or mains decouplers. As soon as these filters are plugged in, the mains disconnector does not switch off anymore, because there is too much permanent consumption from these filters. We came to the conclusion that we would either have a mains disconnector that has no solution for dirty electricity or a lot more dirty power because there is no more mains disconnector.

Now, whoever knows SFERICS® that this is an unacceptable situation, and it was clear to us that we have to connect them directly to the circuit and not to each socket. The loss of sockets when plugging in Stetzer Filters also disturbs us. We were also told often that after a few months of use, a constant humming would begin to develop, not on all filters, but on some of them in the set.

We have found the practical solution that we wanted with our X21 and X25 mains filters. Both work great together and the Stetzer Microsurge Meter also confirms this. By installing the mains filter, the connected circuit will effectively dampen dirty electricity all day long, even if power is being consumed and the mains decoupler still works the same way. If the mains filter is installed directly next to the mains disconnector, the whole functionality of the mains disconnector is further optimized.

Is the achievable attenuation against Dirty Electricity comparable to the Stetzer filter?

This can be, but does not have to be. We already had both results from the half attenuation to the comparable reduction in the circuit. Up to 3 mains filters can be effectively connected in series to increase damping. Practice has shown that more capacity filters (4, 5, 6 or even more) have no improvement as result. In the end, however, only trying out with the electrician remains.

Weight 0,10 kg
Dimensions 3,1 × 1,3 × 3,1 cm
Scope of delivery

X25 mains filter

Brand

Country of origin

Germany

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

6 reviews for X25 mains filter 4,7 µF | more powerful capacity filter against dirty electricity

4.7
Based on 6 reviews
5 star
66
66%
4 star
33
33%
3 star
0%
2 star
0%
1 star
0%
1-5 of 6 reviews
  1. Avatar of Visa Heikkila

    After installing two X25 filterswere installed in my living rooms wall sockets, the eletrical noise in the visible wiring and especially in my computer decreased notably. The noise also became more “coherent” with less spikes. I used an analog am/fm radio for detetcting the noise. Immediately after installing, I have also felt my muscles and internal feeling got notably more relaxed and anxiety decreased clearly. Installation process was very simple. Im happy, and ordering more of these. Visa

    (0) (0)
  2. Avatar of Anonym

    Works as intented, a bit more work to install.

    (0) (0)
  3. Avatar of Iwona

    This mains filter has helped us very well as my wife is electrosensitive and these filters have improved her health.

    (0) (0)
  4. Avatar of Josef

    O.K.

    (0) (0)
  5. Avatar of Dirk

    Sehr schnelle und richtige Lieferung,

    (0) (0)
Add a review
X25 mains filter 4,7 µF | more powerful capacity filter against dirty electricity X25 mains filter 4,7 µF | more powerful capacity filter against dirty electricity
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review

You may also like…

Out of stock
(1)  8,90 ( 7,48 excl. VAT)
 SALE 
(4) From: Original price was: € 411,60.Current price is: € 404,60. ( 340,00 excl. VAT)
Close Popup

We use cookies to give you the best online experience. By agreeing, you accept the use of cookies in accordance with our cookie policy. Further surfing in the web shop automatically leads to approval.

Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec
  • tk_lr
  • tk_or
  • tk_r3d

Onlineshop
To use this online shop, i.e. for shopping cart and order processing, we use the following technically necessary cookies and services:
  • woocommerce_cart_hash
  • woocommerce_items_in_cart

GDPR
To enable the GDPR service on this website, we use the following technically necessary cookies:
  • wordpress_gdpr_allowed_services
  • wordpress_gdpr_cookies_declined
  • wordpress_gdpr_first_time
  • wordpress_gdpr_first_time_url

Decline all Services
Save
Accept all Services
X25 mains filter 4.7 µF | capacity filter against dirty electricity
X25 mains filter 4,7 µF | more powerful capacity filter against dirty electricity

In stock