TEST BOY 114 | contactless voltage tester for the detection of electrical cable breaks | measurement from 12 volts AC low voltage

The TESTBOY 114 is a high-quality, non-contact voltage tester with optical signaling and vibration alarm.

This tension tester is ideal for detecting invisible cable breaks in the electrical cable or to determine which LED in the fairy lights provides the interruption. Above all, however, the Testboy 114 is an ingenious tool for reducing NF electrosmog by detecting incorrectly plugged power plugs into the socket.

Delivery time: approx. 1-3 working days

In stock

SFERICS® field-tested and recommended

 39,90 ( 33,53 excl. VAT)

TEST BOY 114 | contactless voltage tester for the detection of electrical cable breaks | measurement from 12 volts AC low voltage

TESTBOY 114 is a voltage tester for detecting cable interruptions. Find the correct insertion direction of the cable?

DETECT ELECTROSMOG – REDUCE ELECTROSMOG – AVOID ELECTROSMOG!

The Testboy 114 convinces on the whole length. Both the type of signal message as well as the wide measuring range between 12 and 1000 volts AC (AC) make this a valuable tool in electrical problem detection. We are convinced that such a non-contact voltage tester should not be missing in any household or tool bag, so much so that the Testboy 114 makes everyday life easier when looking for an electrical fault.

There are several models from TESTBOY. We chose a high quality model that has the widest range of application and the optimal signal message upon detection of the error. To detect the TESTBOY 114 uses a capacitive measuring method (measurement based on change in the electric field). The measurement takes place without contact and is therefore simple, fast and effective. An invisible cable break in the extension cable can be located within a few seconds to the centimeter. The advantages of Testboy 114 are:

  • capacitive measurement procedure
  • measurements from 12 V
  • LED torch
  • optical indication (red luminous)
  • vibrating indication
TEST BOY 114 | contactless voltage tester for the detection of electrical cable breaks | measurement from 12 volts AC low voltage

Enormous measuring range of the Testboy 114 allows a wide application

The application can not be simpler. Simply slide along the power cable with the Testboy 114; if the signal is interrupted, the interruption in the electric cable is found. The detection starts at 12 volts and reaches 1,000 volts. Thus, with just this one voltage tester, just about anything electrical in the home can be checked. The Testboy 114 was designed to detect interruptions, but we see a major advantage in detecting and avoiding electric fields with this voltage tester. Thus, the correct insertion of the power plug alone can significantly reduce the automatically produced electric field.

Examples of possible applications of the Testboy 114

  • A loose contact in the electric cable from the household appliance. Depending on how the cable is twisted or bent, this will work with a connected home appliance. With the Testboy 114 the cable break is found immediately.
  • An LED in the fairy lights is defective. This leads to the fact that the whole fairy lights no longer work. With the Testboy 114, the spot with the defective LED is found immediately, replace LED, done.
  • Incorrect plugging the power plug produces an unnecessarily high electric field. With the testboy 114, the optimal insertion direction can be found.

Spezifikationen des TESTBOY 114

  • Display: Optical + vibrating
  • Measurement range: 12-1000 V AC
  • Overload category: CAT III 1000 V
  • Integrated LED-torch lamp: yes
  • Standard: IEC/EN 61010-1 (DIN VDE 0411)
  • Housing: ABS synthetic material, resistant to breaking by impact
  • Dimension: 160 x 25 mm
  • Weight: 45 g
  • Colour: red
  • Scope of delivery: incl. batteries
Out of stock
(1)  199,00
This product has multiple variants. The options may be chosen on the product page

Documentation for the voltage tester (.pdf)

Manual instructions Technical data

Detection of false insertion of the mains plug (german)

Weight 0,1 kg
Dimensions 14,5 × 2 × 2 cm
Application

Detecting invisible cable breaks in the extension cable. Detection of the ideal plug-in direction from the power plug in the socket for maximum reduction of low-frequency electrosmog.

Operation

2x AAA battery (included)

Brand

TARIC Producttype

Measuring device

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Reviews

There are no reviews yet

Add a review
TEST BOY 114 | contactless voltage tester for the detection of electrical cable breaks | measurement from 12 volts AC low voltage TEST BOY 114 | contactless voltage tester for the detection of electrical cable breaks | measurement from 12 volts AC low voltage
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review

You may also like…

HOT
(1) from:  33,70
This product has multiple variants. The options may be chosen on the product page
(7)  67,50 ( 56,72 excl. VAT)
Close Popup

We use cookies to give you the best online experience. By agreeing, you accept the use of cookies in accordance with our cookie policy. Further surfing in the web shop automatically leads to approval.

Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec
  • tk_lr
  • tk_or
  • tk_r3d

Onlineshop
To use this online shop, i.e. for shopping cart and order processing, we use the following technically necessary cookies and services:
  • woocommerce_cart_hash
  • woocommerce_items_in_cart

GDPR
To enable the GDPR service on this website, we use the following technically necessary cookies:
  • wordpress_gdpr_allowed_services
  • wordpress_gdpr_cookies_declined
  • wordpress_gdpr_first_time
  • wordpress_gdpr_first_time_url

Decline all Services
Save
Accept all Services
TEST BOY 114 | contactless voltage tester for the detection of electrical cable breaks | measurement from 12 volts AC low voltage
TEST BOY 114 | contactless voltage tester for the detection of electrical cable breaks | measurement from 12 volts AC low voltage

In stock