Shielding materials and products are diverse. And extremely rich in essential technical details - a dramatic disadvantage for the layman. A small change in numbers in the screening attentuation report can ultimately mean a huge difference in measurement technology. EMF shielding classes create the common thread.
In the ULTRA performance class, the focus is on MAXIMUM. Only highly developed shielding materials create our metrological requirements for the SFERICS® ultra classification. When every single dB counts!
SFERICS® ultra - for data centers, laboratories and people
Shielding materials and products are diverse. And extremely rich in essential technical details - a dramatic disadvantage for the layman. A small change in numbers in the umbrella report can ultimately mean a huge difference in measurement technology. EMF shielding classes create the common thread.
In the PRO performance class, the focus is on HIGH. Purely highly developed shielding materials create our technical requirement for a SFERICS® pro classification. When above-average shielding is the goal!
SFERICS® pro - for server rooms, universities and people
The stainless steel gauze V4A10 is ideal for effective EMF shielding with a shielding effectiveness of up to 40 dB. Due to its corrosion resistance, it is especially ideal for use as the basis of a basic shielding on exterior walls of the house – even in saltwater areas.
Price per meter (100 x 90 cm)
Quantity = number of linear meters
Delivery time: 1-3 business days | unit price € 13,22/sqm
No right of withdrawal for cut goods | request a free test sample
Price per linear meter | € 6,90 charge per cut + packaging
Shielding stainless steel gauze (mesh) V4A10 for flexible application inside and outside. The shielding fabric is corrosion resistant and insensitive to heat. With this shielding fabric against electrosmog HF + LF the highly effective radiation protection against electrosmog is possible. Shielding efficiency 99.99% (40dB). Width 90cm.
This V4A10 stainless steel mesh is a finely-woven and corrosion-resistant stainless steel mesh. It can be effectively installed to provide basic protection against electrosmog from radio (HF) and alternating fields from the power supply, for example (LF).
The shielding stainless steel mesh also impresses with its resistance to corrosion. It is ideal for house construction to protect the entire building, even near the coast and salt water. Importantly, the V4A10 stainless steel mesh is very resistant to water, steam, humidity, weak acids and salty seawater on the coast.
Typical use of the V4A10 stainless steel gauze
Inside and outside under the render in insulation, in the ceiling, in timber construction, dry construction, loose laying, and many more. Thanks to its 1mm-thick mesh, it can also be used as a fly screen against midges and mosquitoes, among others.
V4A10 stainless steel gauze technical information
Width: 90 cm
Length: by the meter / 25 m roll
Screening attenuation: 40 dB. The specified dB values apply at 1 GHz. Measurement from 40/600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006.
Grammage: 260 g/m²
Mesh thickness / mesh density: 1 mm
Wire diameter: 0.16 mm
Material thickness: 0.32 mm
Surface conductivity: 0.1 Ohm (square resistance)
Fire-proof material, A1 according DIN 4102:1994
Processing the V4A10 stainless steel mesh against electrosmog
When working under a render, this V4A10 stainless steel mesh should be stuck with the finest organic filler (without fillings) possible. When working under flooring (laminate, parquet, PVC, etc.), V4A10 is stuck on with the adhesive. In dry construction and ceilings, the tracks fasten or can be stuck on as required.
The following always applies: the tracks overlap for 5cm.
For grounding, our stainless steel tape is put on across all of the tracks and stuck to the substrate/tracks.
This product has multiple variants. The options may be chosen on the product page
Order quantity, revocation of the order and small quantity surcharge
If the fleece has been cut in pieces of 1.0 running meter as requested by the customer, it is not possible to cancel or revoke the order.For this reason, it is possible to request a free sample of the shielding fleece. By ordering pre-finished products, waiving the statutory right to return goods is accepted.
Small quantity surcharges for small quantities up to 3 running meters have been removed for reasons of transparency and fairness. The individual linear meter therefore always has the same price or price advantage for larger quantities. To refinance expenses and packaging, we charge a flat rate of € 6,90 per cut.
We use cookies to give you the best online experience. By agreeing, you accept the use of cookies in accordance with our cookie policy. Further surfing in the web shop automatically leads to approval.
When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.
To enable the GDPR service on this website, we use the following technically necessary cookies:
wordpress_gdpr_allowed_services
wordpress_gdpr_cookies_declined
wordpress_gdpr_first_time
wordpress_gdpr_first_time_url
Preference cookies enable a website to remember information that changes the way the website behaves or looks, like your preferred language or the region that you are in.
SFERICS® ultra
SFERICS® pro
SFERICS® invest4life
Material exactly as expected
Fulfils its service perfectly
het the dearer one it hurts your hands