🏖 We are on vacation
Reduced shipping during our company holiday. Next regular shipping on September 9, 2024. | More details »
ARM40 is a non-slip, dimensionally stable glass mesh fabric for large-area screening of high-frequency electromagnetic fields (HF) and low-frequency alternating electric fields (LF).
The reinforcement fabric ARM40 enables a shielding effectiveness of up to 23 dB and is intended for use under plaster and for loose laying in timber construction, dry construction and solid construction. Width 100 cm
Price per meter (100 x 100 cm)
Quantity = number of linear meters
Delivery time: 1-3 business days | bulky goods shipping | unit price € 11,00/sqm
No right of withdrawal for cut goods | request a free test sample
Price per linear meter | € 6,90 charge per cut + packaging | ||||
per meter (cut) | from 50 m (Roll) | from 200 m (Rolls) | ||
€ 9,90 | € 9,00 | € 8,60 |
from: € 9,90
ARM40 reinforcement fabric is a non-slip and dimensionally stable glass mesh fabric for large-area screening of high-frequency electromagnetic fields (HF) and low-frequency alternating electric fields (LF). We are replacing our previous shielding reinforcement fabric with this ARM40, as it is equivalent in terms of shielding effectiveness, but the price/performance ratio is much more attractive.
ARM40 can be used as a reinforcement fabric in the exterior area in the thermal insulation composite system (Therm/ispotherm ETIC systems) under plaster. It is also well suited for interior use under plaster. It is also suitable for loose laying in roof areas, under facades, under floor coverings, under wooden boarding in roof and wall areas, etc.
EXPANSION LEVEL 1:
Shielding reinforcement fabric is not suitable as the only full protection system against modern radio technologies such as WIFI, LTE or 5G because the shielding effectiveness is too low. However, ARM40 is excellently suited to achieve basic shielding. With ARM40 it is possible to achieve a cost-effective basic shielding of an entire house, as only the otherwise used reinforcement fabric is replaced.
This means that wireless terminals can continue to be used inside the house, which must maintain a connection to the mobile radio transmitter outside the house. With the single-layer processing of ARM40, a shielding effectiveness of up to 25 dB (99.5%) is achieved, i.e. the compensation of the shielding of the house by the mobile phone, for example, is insignificant. Nevertheless, a measurable reduction of the electrosmog HF immission from external transmitters within the house is achieved by this overall shielding. With the two-layer application, this protection is further increased to up to 33 dB (99.93 % efficiency).
EXPANSION LEVEL 2:
The rooms essential for daily rest, relaxation and regeneration are additionally shielded within the house by means of shielding paint or shielding fabric with a shielding effectiveness of at least 40 dB (99.99 %). This is usually reduced to bedrooms or, if required, the home office as a home office. This combination of external shielding and additional internal shielding provides extremely effective and future-proof protection against high-frequency pulsed microwave radiation (mobile radio, mmWave) and dramatically reduces the annually increasing exposure of the body to permanent electrosmog HF.
The processing of the shielding mesh is identical with the application of conventional glass fibre fabric. Needs to be pressed non-porously and wrinkle-free into the freshly spread reinforcing mass, then levelled out.. The mesh needs to lie in the upper third of the reinforcing mass and be completely covered by it. The overlapping between the panels needs to be 10cm. The overlapping needs to be ensured at corners of a building, too. Building openings (windows, doors) require a diagonal reinforcement with fabric strips. Has the mesh been cut in (e.g. in the area of scaffolding anchors), an additional fabric strip needs to be placed above the cut. For grounding, the stainless steel perforated tape ELB must be screwed securely onto the underground across/with all panels.
Technical data for shielding reinforcement fabric ARM40
If the netting has been cut in pieces of 1.0 running meter as requested by the customer, it is not possible to cancel or revoke the order. For this reason, it is possible to request a free sample of the shielding fleece. By ordering pre-finished products, waiving the statutory right to return goods is accepted.
Small quantity surcharges for small quantities up to 3 running meters have been removed for reasons of transparency and fairness. The individual linear meter therefore always has the same price or price advantage for larger quantities. To refinance expenses and packaging, we charge a flat rate of € 6,90 per cut.
Weight | 0,25 kg |
---|---|
Dimensions | 100 × 90 × 0,045 cm |
Running meter | Quantity = desired length of shielding netting |
Length | Linear meter, 50 meters roll |
Width | 90 cm |
Color | black |
Field type | HF (high-frequency electromagnetic field), LF (low-frequency electric alternating field) |
Ecology | Normal |
Country of origin | Germany |
GTIN | 4260103667814 |
Grounding, mobile
Grounding, permanent
Grounding housing, stationary | grounding of shielded surfaces | indoors and outdoors
When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.
Approx. 200m² of adhesive filler with very good workability was produced with the reinforcing mesh. The earthing was carried out by means of a stainless steel perforated strip laid all around, which was connected to the earth conductor at all 4 corners of the house.