9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27

This LED TRICOLOR Pure-Z-Retro with 9 watts produces a friendly natural light in three different light colors. The mode change takes place directly on the wall light switch and changes from warm white to daylight white to cool white).

The light produced is almost flicker-free. The light output corresponds to an 80 watts light bulb with a high color rendering index of over CRI 90. LED lamps in this quality class are state-of-the-art lighting technology and are highly recommendable from a building biology point of view.

Delivery time: approx. 1-3 working days | formerly energy class A+

In stock

9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI data-lazy-src=

9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27

Switchable 9 watt feel-good LED TRICOLOR Pure-Z-Retro with E27 base. Three switchable light colors (warm white, daylight white, cool white) produce an almost flicker-free natural BIO LIGHT with high color rendering. Not dimmable.

This LED is a 3-in-1 illuminant with a near-natural BIO light i.e. with a high color rendering and almost “flicker-free” light.

The almost continuous spectrum of the emitted light is in the “warm white” mode close to that of incandescent or halogen lamps, but without the proportion of heat radiation (IR or infrared radiation). However, the two other operating modes “daylight white” and “cold white” make this LED technologically superior.

With this TRICOLOR LED, we are expanding our existing 12 watt (comparable to 100 watts) and also switchable full spectrum DUOLIGHT LED by a further model with lower luminous intensity. If we use the LED DUOLIGHT in commercial offices, the focus of this LED TRICOLOR is on private households.

3in1 Switching BioLight
Instructions for color change with switch

3in1 » 3 light colors in one LED

This color temperature switching technology was previously reserved mainly for commercial use due to price reasons. With this new development with reduced power, it has been possible to achieve an attractive price level. The reasons for this are private use, which is significantly lower in relation to commercial use, and the luminous intensity can also be lower.

The function for switching the light temperature remains the same, only the sequence of the individual light temperatures is adapted to the private household.

  • Warm white with a color temperature of 3,000 Kelvin
  • Daylight white with a color temperature of 4,000 Kelvin
  • Cold white with a color temperature of 6,500 Kelvin

The color change takes place directly at the light switch on the wall. If the light switch is operated within 3 seconds with Off/On, the LED TRICOLOR changes to the next color temperature. If the light remains off for longer than 3 seconds, it restarts at the first color temperature, warm white with 3,000 Kelvin – similar to the classic Edison light bulb or halogen light.

9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27

Details make the difference. This is especially true for LED’s!

The colour rendering index (Ra or CRI) describes the effect of light on the colour appearance of objects by comparison with daylight (not dependent on colour temperature). Incandescent lamps have a CRI of 100, these LEDs have a very good CRI of over 90.

The colour temperature is a measure of the respective colour impression of a light source. Warm light colours (warm white, 2700 K) have a low Kelvin number, cold light colours (cold white, 5000 K) a high one. This LED TRICOLOR is able to display 3 colour temperatures. Warm white, cold white and daylight white.

The light exit angle of almost 360º is very well suited for all applications where incandescent lamps were previously used.

LED lamps are made of a semiconductor and operated with integrated ballast. The resulting voltage produces a “light flicker” (pulsation). This pulsation could be reduced to a minimum (below 1 %) with the “filament” LED.

Electrosmog: The Pure-Z-Retro LED has been designed to generate low technical fields comparable to those of a light bulb.

Consideration of the time of day: This is exactly where this TRICOLOR LED shows its full strength in private rooms. Daylight white and cold white contain a significantly higher blue component. This influences the human waking state and prevents the formation of melatonin, which is absolutely necessary for restful sleep. Later in the day, when reading in the evening, in the living room, at the bedside table or generally in the period before going to bed, switch the operating mode to warm white.

LED TRICOLOR Pure-Z-Retro bulb almost flicker-free!

Flicker rate Pure-Z LED

9 watts LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumen | CRI 90 | flicker-free | E27

Performance data of this LED illuminant brought to the point

  • E27 socket
  • 9 watts (corresponds to the light output of an 80 watts bulb)
  • 800 to 850 lumen Luminous flux
  • almost flicker-free – pulsating light / pulsation < 1% – high light / pulsation
  • Color rendering index: above CRI 90, for the most authentic and eye-friendly colors
  • Color temperature: 3000 K (Kelvin), 4000 K and 6500 K
  • Glass: diffuser matt
  • Not dimmable
  • Lifetime: up to 20,000 hours
  • Switching cycles: up to 20,000
  • Starting time: less than 1 second
Light spectrum Pure-Z Retro LED
Light spectrum energy-saving lamp, typical
Schematic oscillogram of an energy-saving lamp
EU Energylabel 2021

The new EU energy label since 2021

The new EU energy label for light sources, which will apply from September 1st, 2021, not only looks different, it is also based on new, stricter classification criteria. As a result, lamps and lights are classified in lower energy classes. However, nothing has changed in terms of the power consumption of the lamp.

Details on the new EU energy label 2021

Documentation for the LED illuminant (.pdf)

Information flyer (german)
Weight 0,04 kg
Dimensions 6 × 6 × 11 cm
Scope of delivery

LED illuminant

Light output

9 watt (equivalent to a 80 watt light bulb)

Energy class

F (formerly energy class A+)

Brand

GTIN

4260238240982

TECHNICAL DETAILS LED SPOT BULB TRICOLOR PURE-Z-RETRO, 9 WATT
Colour matt white
Width 60 mm
Height incl. thread 110 mm
Operating voltage 230 VAC / 50 Hz
Energy efficiency F (formerly energy class A+)
Features almost flicker-free – pulsating light / pulsation < 1%
Type Globe / E27
Light exit angle almost 360° (all-round light, like a light bulb)
Colour temperature warm white (3000 K), cool white (4000 K), daylight white (6500 K)
Power 9 watt
Light flux 800-850 lm (Lumen)
RA value > 90 (CRI / Ra)
Lifetime up to 20,000 hours
Switching cycles up to 20,000
Start time < 1.0 s
Important Information not dimmableATTENTION: Not suitable for dimming
Field of application Can be used in all lamps with E27 socket. Please note the dimensions of the lamp.
Warranty The guarantee is with proper treatment with the usual 2 years (§434 BGB + §446 BGB)

Customer questions and answers

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

3000 Kelvin | warm white
9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27, 3000 Kelvin
9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27, 3000 Kelvin
9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27, 3000 Kelvin
Download data sheet measurement
9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27, 4000 Kelvin
9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27, 4000 Kelvin
9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27, 4000 Kelvin
Download data sheet measurement
9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27, 6500 Kelvin
9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27, 6500 Kelvin
9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27, 6500 Kelvin
Download data sheet measurement

Pay attention to healthy light when buying lamps!
Healthy light from a building biology point of view, is a light source modelled on the sun

  • without flickering, as close as possible to 0 Hz (Hertz)
  • a light spectrum/colour spectrum that is as close to nature as possible, without the predominantly much too high proportion of blue light in an LED, for example. This serves to protect the macula (prophylaxis against premature macular degeneration).
  • Day-adapted colour temperature, i.e. full spectrum during the day and warm light in the evening.

Further information on the effect of light colour on people (german): CLICK HERE

Reviews

There are no reviews yet.

Be the first to review “9 watt LED TRICOLOR Pure-Z Retro | 3in1 = 3 switchable light colors | bright like 80 watts, 850 lumens | CRI >90 | flicker-free | E27”

Your email address will not be published.

Often bought together…

We use cookies to give you the best online experience. By agreeing, you accept the use of cookies in accordance with our cookie policy. Further surfing in the web shop automatically leads to approval.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec
  • tk_lr
  • tk_or
  • tk_r3d

To use this online shop, i.e. for shopping cart and order processing, we use the following technically necessary cookies and services:
  • woocommerce_cart_hash
  • woocommerce_items_in_cart

To enable the GDPR service on this website, we use the following technically necessary cookies:
  • wordpress_gdpr_allowed_services
  • wordpress_gdpr_cookies_declined
  • wordpress_gdpr_first_time
  • wordpress_gdpr_first_time_url

Decline all Services
Accept all Services