RDF62 shielding window film | RF screening attenuation against electrosmog up to 18 dB | 62 % light transmission

Only use indoors on glass surfaces WITHOUT GLAZING!

Thermal glazing is already metalized. If solar radiation permeates the metallization and then hits the shielding window film, multi-reflection may occur. The window frame heats up needlessly and can thus cause leaks or even cracks by expansion of the frame! Always find out the glass type!

Processing of the HF electrosmog shielding window film RDF62

It is mandatory to use the FVR10 Scraper and the FMK30 Mounting Concentrate for the installation.
Applying the shielding film without air bubbles is not necessarily easy and it is advisable to do this with two people. First, use a cleaning concentrate and a glass scraper to remove all unevenness and dirt from the glass. Then thoroughly clean the glass with window cleaner.

Remove the protective film from the shielding film. Dilute the mounting concentrate FMK30 with 0,5 liters of distilled water and spray both the window surface and the adhesive side of the shielding film. Apply the window film onto the window glass and use the FVR10 scraper to work from the center outwards, pressing out the air bubbles.

Detailed installation instructions are included with the film.

Quantity and cancelling the order

If cut in measures of 1,0 running meter according to the customer’s specifications, it is not possible to return or cancel the order. For this reason, it is possible to request a free sample of the shielding film.

By ordering pre-finished products, waiving the statutory right to return goods is accepted.