Shielded device connection cable with free end | black | electric cable for shielding electrical and magnetic alternating fields LF

Shielded device connection cable in black, with Schuko plug and free end for healthy freedom when working with electrical devices. Even if the end device, such as a TV or stereo system, meets modern standards for EMF radiation, the connected electrical cable usually goes unnoticed.

With this electric cable, this “weakness” will also be remedied – a rebuild by an electrician makes this possible.

Delivery time: approx. 1-3 business days

Shielded device connection cable with free end | black | electric cable for shielding electrical and magnetic alternating fields LF
Shielded device connection cable with free end | black | electric cable for shielding electrical and magnetic alternating fields LF

SFERICS® field-tested and recommended

ab:  15,60

Shielded device connection cable with free end | black | electric cable for shielding electrical and magnetic alternating fields LF

Shielded device connection cable with free end, black, for flexible use

This shielded electrical cable with a free end provides healthy freedom when working with electrical devices. Even if the device, such as a television, stereo system or SAT receiver, meet modern standards, like TCO, the electric cable used remains the “weakness” for electrosmog through low-frequency alternating fields most of the time.

With this shielded device connection cable, the electrician can change this situation quickly and effectively – simply by exchanging the cable.

After the exchange, the electrical cable’s alternating field LF is very strongly reduced, i.e. so low that it is usually no longer measurable. In addition, this shielded electrical cable with a free end also reduces the magnetic field. This is achieved by twisting the wires 15 times per meter.

Details of shielded cable and Schuko plug and free end, black

  • 2 meters length with cable cross-section 3x 1.00 mm²
  • 3 meters length with cable cross-section 3x 0.75 mm²
  • Color: black

Ideal areas of application and use

  • Bedroom and children’s room
  • Living rooms
  • Offices / PC workstations
  • Home office
  • Guest room
  • Kitchen
  • etc.

For retrofitting protection class 1 devices (movable devices), e.g.

  • Lights
  • Iron
  • Kitchen appliances
  • Radio
  • etc.
Alternating electric fields LF radiation Symbol image

This shielded cable is usable in the following countries

CEE-7/4 (German system) and CEE-7/7 (French system): Afghanistan, Algeria, Andorra, Austria, Belgium, Bosnia-Herzegovina, Bulgaria, Croatia, Czech Republic, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Indonesia, Italy, Korea, Latvia, Lithuania, Luxembourg, Macedonia, Moldova, Monaco, Montenegro, Morocco, Netherlands, Norway, Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, South Korea, Spain, Sweden, Tunisia, Turkey, Ukraine.

Documentation (.pdf)

Download data sheet Details on building biology electrical installations
Weight N/A
Dimensions N/A
Length

2 meters, 3 meters

Scope of delivery

Electric cable

Field type

LF (low-frequency electric alternating field)

GTIN

4260004782821, 4260004783361

Country of origin

Germany

TARIC

85366990

Brand

.

.

.

Board unit Pc. (piece)
Colour black
Length 200 cm and 300 cm | ±2%
Operating voltage 230 VAC
Load Operating voltage max. 250VAC / 50Hz – 10A acc. to IEC 884
Test basis individually according to EN 60320/2.2 (ISO 9002) TCO’99 (MPR II, DIN prEN 50279)
Screen attenuation max. in dB (earth-dependent)
Screen attenuation max. in dB > 99 % (earth-dependent)
Processing Very high-quality and sturdily designed shielded device connection cable with open end.
Diameter (2 m)
Ø 7.1 mm ± 0.2 mm
Diameter (3 m)
Ø 6.6 mm ± 0.2 mm
Cable insulation Polyvinyl chloride
Cable open end stripped approx. 70 mm, with wire end ferrules
Cross-section (2 m)
3 x 1.0 mm² (shielded)
Cross-section (3 m)
3 x 0.75 mm² (shielded)
Shielding Plastic-coated aluminium tape, two-wire Cu 1.0 mm²
Shielding alternating magnetic field Stroke 10 (single wires twisted against each other once per 10cm – compensation)
Protection class 1 (with protective earth yellow/green)
Angled plug injected, CEE standard 7/VII, DIN 49441
Important information CAUTION: The installation of the appliance connection cable is exclusively reserved for a qualified electrician! Be sure to disconnect the mains voltage before inserting the cable. Please also pay attention to the fact that the light source may still be hot and can cause burns!
Application 1. bedrooms and children’s rooms
2. living rooms
3. offices / PC workstations
4. guest room
5. kitchen
6. etc.
Example application For retrofitting protection class 1 devices, such as luminaires and movable devices
Scope of delivery 1. device connection cable, 2. installation instructions
Other notes The appliance connection cable is ideal for retrofitting shielding of conventional metal luminaires with nostalgic value. Simply connecting the cable does not automatically shield the light source. If this is desired, we recommend luminaires that are completely shielded. You will find these in the category “Shielded lights” in this shop.
Warranty The warranty for this product when handled properly is the usual 2 years (§434 BGB + §446 BGB)

Customer questions and answers

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

1 review for Shielded device connection cable with free end | black | electric cable for shielding electrical and magnetic alternating fields LF

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. Avatar of Sonja S.

    Sonja S. (Verified Owner)

    Ideal for lowering EMF…

    (0) (0)
Add a review

Your email address will not be published.

Cancel

Often bought together…

HOT
HOT

We use cookies to give you the best online experience. By agreeing, you accept the use of cookies in accordance with our cookie policy. Further surfing in the web shop automatically leads to approval.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec
  • tk_lr
  • tk_or
  • tk_r3d

To use this online shop, i.e. for shopping cart and order processing, we use the following technically necessary cookies and services:
  • woocommerce_cart_hash
  • woocommerce_items_in_cart

To enable the GDPR service on this website, we use the following technically necessary cookies:
  • wordpress_gdpr_allowed_services
  • wordpress_gdpr_cookies_declined
  • wordpress_gdpr_first_time
  • wordpress_gdpr_first_time_url

Decline all Services
Accept all Services