INDIVIDUAL EXTENSIONS FOR THE CANOPY ELECTROSMOG ULTRA + PRO. For retrofitting a shielding floor underlay, components for activating the grounding potential and other optional accessories.
The canopy electrosmogElectrosmog is a colloquial term for all emissions from electric, magnetic, and electromagnetic fields. More ULTRA + PRO offers all-round protection against HF and LF electrosmog. However, accessories are required for the shieldingShielding is the protection from the effects of external fault zones and environmental influences (on a person's health most of the time). More of low-frequency alternating electric fields (LF) from the house current.
It is possible that the canopy electrosmog ULTRA + PRO was not ordered as a set and thus without groundingGrounding is an electrically conductive connection with the electric potential of the ground. More components. Or the decision to activate the earthing function of the canopy is made later. With this option for individual extension, it is possible to use the canopy electrosmog ULTRA + PRO with its full potential and effect against electrosmog. The optional accessories in the set are also fully available.
Shielding flooring underlay
The set contains two flooring underlays made of different material layers. Additional silver threads are interwoven on the underside, which is what makes the flooring underlay electrically conductive and gives it a protective effect. The flooring underlay is laid out on the floor and then the bed is put on the underlay. The feet of the bed can no longer touch the ground underneath.Details on the shielding flooring underlay
The set contains three grounding plates. One is attached to the canopy and the other two are attached to the shielding flooring underlays (one per underlay). The conductive material can be contacted thanks to these plates and can be connected to the socket’s earth. You can choose between velcro fastener and magnetic lock.Sleeping bag details
Grounding cable for the grounding plates
The two short cables have a gilded pin on each end. The cables connect the grounding plate on the canopy to the grounding plate on the shielding flooring underlay, as well as the first flooring underlay to the second flooring underlay. Because the three grounding plates are right next to each other most of the time, the short, 20-centimeter-long cable is usually enough.Details of the grounding cable for the panels
Grounding plugs for specific countries
Depending on the location of usage, another type of plug might be needed. Choose the right plug for the country it is mainly used in. The optional world plug set expands this individual plug into a connection option in the whole world. However, the world plug set is not designed for permanent use, therefore the individual grounding plug is absolutely necessary.Details of the grounding plug
OPTIONAL: Quick verification of the earth contact on the socket
With this socket checker, checking the socket’s earth will be a matter of plugging in. You will find out in just seconds whether or not your canopy or sleeping bag can effectively connect to the earth. We know from practice that there are many reasons that an earth cannot be connected – from the cable breaking to the electrician simply forgetting during construction. If the earth cannot be connected, the canopy can fail to protect people sleeping in it from electric alternating fields from the power supply despite the preparation.Details of the socket tester
OPTIONAL: Grounding rod for a reliable earthing
It is as tragic as it sounds. It is possible that the earth is not connected to the socket or that such a socket is not even provided in that country. Or, the installed grounding cable is damaged and no one has noticed. Whatever the reason may be, you will solve the problem with this earthing rod. Just put it in the ground, outside of the flat, house, caravan, or tent and connect it to the sleeping back – that’s it.Details of the grounding rod
OPTIONAL: Powerline PLC filter for cleaning the electric cable for grounding the canopy
Powerline PLC or DLAN uses frequencies between 2 and 68 MHz. This line filter effectively attenuates all high-frequency powerline signals up to 80 MHz in the grounding cable and thus solves the problem of PLC signal transmission to the canopy via the connected grounding cable. The most effective solution would be not to use DLAN, which is not possible if the neighbor relies on this technology and thus also “pollutes” their own power lines.Details of the Powerline PLC Filter
OPTIONAL: Worldwide use of the Electrosmog PRO canopy with our World Plug Set
For the first time, it is possible to use our canopy electrosmog PRO worldwide with our World Plug Set: whether you live abroad or, in other words, outside of Austria or Germany, are out and about on holiday, or in hotels for work or private use. Using this set could not be easier – just connect the canopy or shielding flooring underlay and a long-enough grounding cable to this plug’s connection sockets. Ready!Details on the World Plug Set
There are no reviews yet.