76 cm

NEW

RDF72 shielding window film | RF screening attenuation against electrosmog up to 33 dB | 72 % light transmission | Effective against 5G!

RDF72 shielding window film | SET | RF screening attenuation against electrosmog up to 33 dB | 72 % light transmission | 76 cm width | Effective against 5G!

Name: ▷ RDF72 shielding window film | 76 cm width | up to 33 dB
Brand: YSHIELD®
SKU: RDF72-SET-WD
Availability: InStock

RDF72 shielding window film for sticking on window panes. Up to 33 dB shielding effectiveness against radio radiation HF. 72 % light transmittance. Electrically non-conductive and therefore not groundable for LF. For indoor application on non heat absorbing glass surfaces.

Price per meter (100 x 76 cm)
Quantity = number of linear meters

Delivery time: 3-5 business days | unit price € 118,29/sqm
No right of withdrawal for cut goods | request a free test sample

SKU: RDF72-SET-WD Category: Shielding window film Tags: 5G, 76 cm, Electrosmog, RDF72, Shielding, Window film

CHOOSE ACCESSORIES

RDF72 shielding film | 76 cm width

Width

76 cm

Edge sealant FL4 | mandatory protective lacquer pen for some shielding window films

Necessary: Edge sealing

Required for sealing the cut edge(s)

Add for € 19,90 (€ 16,72 excl. VAT)

FMK30 mounting concentrate | for wet, bubble-free application of our shielding window films

Necessary: Mounting concentrate, 30 ml

Required for bubble-free wet application of window film. 30 ml of concentrate is sufficient for 3 linear meters of window film.

Add for € 4,90 (€ 4,12 excl. VAT) each

Plastic scraper FVR10 | for air bubble-free wet bonding of shielding window films

Necessary: Scaper

Required for bubble-free wet application of window film

Add for € 7,90 (€ 6,64 excl. VAT)

The RDF72 shielding window film contains 12 metal layers and thus provides a shielding effectiveness of up to 33 dB. 76 cm width. Effective against 5G and yet we recommend and prefer shielding fabrics as curtains.

This self-adhesive RDF72 special film contains 12 precious metal coats and is suited for protecting from high-frequency electromagnetic radiation caused by mobile radiation from transmitters, mobile phones, smartphones, WIFI, etc. It is typically stuck on the inside of windows without glazing.

Despite the screening attenuation of up to 33 dB, we only recommend using it sparingly because when using the shielding window film, the window frame remains unprotected because the attenuation is weak. Generally, shielding curtains should always be preferred. However, there are uses that make shielding window films useful, such as on windows and doors inside buildings.

The RDF72 shielding film’s light transmission is 72 %. RDF72 is a shielding film with 12 metal layers for the highest standards of quality. The screening attenuation achieved is unparalleled for a film with such high light transmission!

Technical data for the shielding window film RDF72

Screening attenuation: up to 33 dB. Unless otherwise stated, the indicated dB-values apply to 1 GHz. Measurement from 600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006.
Width: 76 cm
Length: by the meter / 30 m roll
Light transmission (transparency): 72 %
Edge sealing necessary: yes, with FL4 edge sealant
Color of light (daylight coloration): light green (a hint of green)
Indoor use, mainly on glass but also on doors and other flat surfaces.
Mounting: Water-activated and pressure-sensitive adhesive on the back.
Material thickness: 75 µm
Grounding: With an electrically isolated surface and cannot be contacted or grounded.
Application: Windows
Field type: HF (high-frequency electromagnetic fields)
Ecology: Normal

Only use indoors on glass surfaces WITHOUT GLAZING!

Thermal glazing is already metalized. If solar radiation permeates the metallization and then hits the shielding window film, multi-reflection may occur. The window frame heats up needlessly and can thus cause leaks or even cracks by expansion of the frame! Always find out the glass type!

Processing of Shielding Window Film Against RF Electromagnetic Smog

It is mandatory to use the FVR10 Scraper, the FMK30 Mounting Concentrate, and the FL4 Edge Sealant for the installation.
Applying the shielding film without air bubbles is not necessarily easy and it is advisable to do this with two people. First, use a cleaning concentrate and a glass scraper to remove all unevenness and dirt from the glass. Then thoroughly clean the glass with window cleaner.

Remove the protective film from the shielding film. Dilute the mounting concentrate FMK30 with 0,5 liters of distilled water and spray both the window surface and the adhesive side of the shielding film. Apply the window film onto the window glass and use the FVR10 scraper to work from the center outwards, pressing out the air bubbles. CAUTION: To allow excess water to evaporate, apply the edge sealant only 8 weeks after the installation of the window film!

Detailed installation instructions are included with the film.

MODEL
2025

MEASURING

From: € 479,00 (€ 402,52 excl. VAT)

Add to basket

TEST

Samples of shielding material | up to 3 material samples for free

Shielding stainless steel gauze V4A10 | RF screening attenuation against electrosmog up to 40 dB | For laying. 90 cm width. 5G ready!

Shielding accessories

€ 0,50

Select options

Quantity and cancelling the order

If cut in measures of 1,0 running meter according to the customer’s specifications, it is not possible to return or cancel the order. For this reason, it is possible to request a free sample of the shielding film.

By ordering pre-finished products, waiving the statutory right to return goods is accepted.